Classic Boat Archive / 1997 – Aprea Mare Smeraldo 12 (12.20 m) TEST

THE PERFECT GIFT!

Give or treat yourself to a subscription to Boats in Motion print + digital and for only 39 euros a year you get the magazine at home plus read it on your PC, smartphone and tablet. With a sea of advantages.

Welcome to the special Classic Boat Archive section, where Boats by Motor opens for you its paper archive where hundreds and hundreds of boats we have tested, presented and reviewed in the magazine’s more than 35-year history are kept. Technical data, original boat data sheets, including engines and performance. In short, a database (constantly being updated) that contains everything you need to know about Classic Boats.


Aprea Sea Smeraldo 12

It’s 1997 when Barche a Motore dedicates the “supertest” to the Smeraldo 12, Aprea Mare’s new flagship, a boat with aesthetics taken care of in every detail, combining the charm of the Sorrentine gozzo with the safety, comfort and speed features typical of modern hulls.

Taken from Motor Boats 1997, no. 1, February, pp. 69-73.

smeraldo 12
The Smeraldo 12 belongs to a modern generation of Sorrentine gozzo boats made by Aprea Mare: the planing hull made of reinforced fiberglass, entirely hand-laminated, is fitted out and finished by shipwrights, who work the fine wood with handcrafted care.

 

PRIORITIES:

  • Fine woods crafted with skill
  • Marine hull with good performance on the rough
  • High habitability in the interior and on deck, with large storage volumes

DEFECTS:

  • A latch in the open position is missing from the albeit capacious aft locker
  • Poor direct lighting on the cooktop
  • Access stairs from aft platform to cockpit a bit steep

The first major evolution of the Sorrentine gozzo dates back to the 1930s, when this classic boat-hitherto propelled by sail or oars-was fitted with a motor propeller. To the charm of tradition typical of the hulls of yesteryear Aprea Mare has now added safety, comfort and speed, creating a state-of-the-art design in which the cared-for aesthetics of old wooden boats are blended with current construction techniques. The result is stunning: the planing hull in reinforced fiberglass, entirely hand-laminated, is fitted and finished with handcrafted care by shipwrights. Each specimen thus remains unique, allowing the shipyard to customize production based on the requirements of each individual user.

smeraldo 12
The Smeraldo 12 under sail.

 

Smeraldo 12 Project:◊◊◊◊◊

The Smeraldo 12, the yard’s flagship, belongs to a new generation of Sorrentine gozzo boats. The hull is a non-constant deep V shape-it goes from 47 degrees at the bow to 11 degrees at the stern-with variable geometry water lines that allow the hull to rise above the water as is the case with planing hulls. The generous beam width gives greater interior roominess and more space on deck. The side profile is sleek, with the deckhouse barely pronounced and the rollbar sloping aft. The driver’s seat is outside but well protected by the windshield and possible canopy. Viewed from the stern, however, the deadrise is more imposing and rounded, with the large teak swim platform cantilevering over the transom.

In the cockpit, aft, a large passenger sofa conceals a huge storage volume that can accommodate a sailor’s cabin if desired. On either side of the backrest are two symmetrical ladders that descend from the companionway to the cockpit.

 

Smeraldo 12 Construction: ◊ ◊◊◊◊

As already mentioned, the hull and deckhouse of the Smeraldo 12 are made of reinforced fiberglass, while the gunwales and gunwales are made of solid mahogany, the aft platform with ladder is of stainless steel and teak, and the deck of teak and iroko. Cherry wood was used for the furniture and interior fittings in general. The hull/deck anchorage is resin-coated and bolted before being rigorously covered in wood, while each screw and bolt is covered by its own wooden plug, for a very neat aesthetic finish. In order to make the mold for fiberglass production, the shipyard built the first prototype of the boat entirely of wood and used it for all sailing tests.

Pictured left: next to the driver’s station is a dinette with facing sofas and fold-down coffee table. Pictured right: the solid teak bar cabinet positioned behind the driver’s seat.

 

Blanket:◊◊◊◊

From the large applied swim platform, one ascends via two vertical ladders to the elevated part of the cockpit. One thus finds oneself behind a comfortable central passenger sofa that leans against the transom and conceals a huge storage volume, intended to become a sailor’s cabin on request. On either side of the settee two steps descend to the cockpit floor. To starboard, behind the helm seat, is a bar cabinet with sink and refrigerator; to the side, the dinette, with opposing (or L-shaped) seating and fold-down coffee table, has a backrest that also swivels aft. The helm station is molded in fiberglass and shaped to accommodate all engine and navigation instrumentation, plus any optional electronics. There is also ample charting space alongside the pilot’s station. The side decks flanking the deckhouse have a minimum width of 33 cm and lead to the large forward sunbathing area, then to the chain cockpit, windlass and stainless steel anchor locker.

At left, the aft pontoon, occupied by a large sundeck. At right, the fiberglass-molded helm console shaped to accommodate all engine and navigation instrumentation, plus any optional electronics. Good views of the hull.

 

Smeraldo 12 Interior: ◊ ◊◊◊◊

As soon as one descends into the interior, one encounters to the left the kitchenette furnished entirely in fine wood, equipped with storage compartments for crockery, drawers, combination oven, electric glass-ceramic stove, 120-liter refrigerator, stainless steel sink with mixer tap, and various cabinets and wall units. Also along the kitchen broadside, at a slightly higher elevation, is the dinette with half-moon sofa and round coffee table; the latter has a fold-down portion to provide more free space when not needed. The space is completed by a series of wall units. The cushion covers are in printed cotton. Opposite the dinette, on the starboard side, is the guest cabin, which boasts a capacious closet, two single beds side by side with a central bedside table, lockers and an interior height of an impressive 2.11 meters. The guest cabin has direct access to the toilet that also serves the saloon. The owner”s double cabin is equipped with a hanging and shelf closet, chest of drawers, lockers, mirror, overhead cabinets and an upholstered bench beside the bed. And of course served by private toilet with shower and electric toilet.

smeraldo 12
At left, the forward master bedroom. To the right, the galley, equipped with a refrigerator, combo oven, ceramic hob and sink.

 

Plant engineering:◊◊◊◊

Particular attention is paid to the engine compartment, which is equipped with good soundproofing, inspection lights, 12/220 volt electrical outlets, and anti-vibration mounts. There are also cooling filters for the engines and filter separators/sedimenters for the fuel. Two are batteries for starting and two others provide power for on-board services. The bilge exhaustion system is also well structured, with three automatically and manually operated electric pumps, to which an emergency hand pump is added.

At left, the guest cabin. At right, the dinette.

 

DMV: ◊ ◊◊◊◊

The Volvo Penta straight-six is a well-proven conventional engine with generously sized crankshaft bearings to achieve smooth, balanced and quiet operation. In addition, the powerplant is equipped with a self-diagnostic unit linked to the EDC injection system (see box on engine). This processes the main parameters detected by the engine ensuring lower and smoother engine speeds. Electric controls work smoothly and precisely and also require less force than mechanical ones. Finally, electric cables eliminate the transmission of vibration from the engine to the control levers. The transmission is shaftline.

The Smeraldo 12 data sheet.

 

Smeraldo 12 Performance: ◊ ◊◊◊◊

Surprising is the performance of this large, traditional-looking Sorrentine gozzo: at maximum rpm the boat is in fact capable of close to 32 knots, progressing from wave to wave with a smooth and confident impact. Directional and maneuverable, with the controls responding readily, the hull has a cruising speed of 26-27 knots that allows good range and maximum comfort on board, even for those who want to sunbathe at the bow while sailing.

Performance measured during our test and the owner’s toilet.

by Roberta Limardo


Are you a Classic Boat enthusiast or simply curious about the excellence of the past? Then the Classic Boat Archive is the place for you: the only column where the entire history of powerboating is made accessible to the public, boat by boat, article by article. Find out what’s already online and keep monitoring the archive-it’s updated four times a week! For your convenience, you can check it out by clicking HERE!

Share:

Facebook
Twitter
WhatsApp

Leave a Comment

Your email address will not be published. Required fields are marked *

Sign up for our Newsletter

Join the Sailing Newspaper Club

Powerboats, its stories, from small open to motoryachts. Sign up now for our free newsletter and receive the best news selected by the editorial staff each week. Enter your email below, agree to the Privacy Policy and click the “sign me up” button.

Once you click on the button below check your mailbox

Privacy*


Highlights

You may also be interested in.

Seaquip is revving up: preparations for the second edition are underway

The second edition of Seaquip, the leading B2B event dedicated to marine accessories, technologies, and components—scheduled for March 2–4, 2027, at the Fiera Milano Rho exhibition center—continues to attract a lineup of top-tier participants. New confirmations of participation from leading players in the maritime industry further reinforce the event’s international scope, highlighting Milan’s logistical and

Three motorboats that have shaped maritime history

Welcome to the Classic Boat column, the magazine’s historical and cultural “guardian”—a space dedicated to exploring the figures, boats, and design developments that have shaped the evolution of motorboating. In this article, we’ll retrace our steps to look back at three pivotal moments— three beginnings destined to become the starting point of a broader adventure:

Portofino 10 Fly (9.93 m)—this is the classic Ligurian cruiser (and it’s a boat)

Portofino 10 Fly The Portofino 10 Fly, featured in the May 1994 issue, is the result of a winning combination of modern construction technologies and the tradition of Ligurian shipbuilding. The result is a hull perfectly suited for long-range cruising, capable of handling challenging sea conditions. It was designed by Angelo Zagano. Excerpted from *Barche

These “magic” plugs automatically inflate your inflatable boat

All it takes is a warmer or colder day, and the inflatable boat changes shape. These aren’t leaks, of course, but rather the tubes, which have varying internal pressure depending on the temperature. The lower the temperature, the lower the pressure. If we leave the inflatable boat in the sun all day, however, the air

Scroll to Top