Classic Boat Archive | 1998 – Ondablu Proteo 30 Fly (9.50 m) TEST

THE PERFECT GIFT!

Give or treat yourself to a subscription to Boats in Motion print + digital and for only 39 euros a year you get the magazine at home plus read it on your PC, smartphone and tablet. With a sea of advantages.

Welcome to the special Classic Boat Archive section, where Boats by Motor opens for you its paper archive where hundreds and hundreds of boats we have tested, presented and reviewed in the magazine’s more than 35-year history are kept. Technical data, original boat data sheets, including engines and performance. In short, a database (constantly being updated) that contains everything you need to know about Classic Boats.


Ondablu Proteo 30 Fly

In 1999, the Ondablu shipyard introduced the Proteo 30 Fly, an “all-around” hull suitable for cruising and deep-sea fishing, with a very livable interior.

Excerpted from *Barche a Motore*, 1999, No. 3, April, pp. 96–99.

The Proteo 30 Fly is based on the hull of the 30 Fish.

 

PRIORITIES:

  • Excellent directional stability at low speeds
  • Plenty of sleeping space relative to its size
  • Adequate soundproofing

DEFECTS:

  • Difficulty Opening the Engine Compartment
  • The berths are a bit cramped
  • Dining table is somewhat unstable

Since 1985, the Ondablu shipyard, under the direction of Luciano Lorenzini, has been producing fiberglass boats with “custom” interiors tailored to customers’ requests. Across the entire lineup—which currently includes 12 models, ranging from 23 to 30 feet in length and comprising cabin cruisers, open boats, and flying-bridge models—it is possible to create different interior layouts and solutions to meet the needs of each individual owner. This is thanks to an artisanal approach that sets it apart from mass production by offering customized solutions.

Proteo 30 Fly Project: ◊◊◊ ◊

A high, star-shaped bow, a pronounced sheer line, and a two-level deck with an attached flying bridge: the new Proteo 30 Fly , based on the 30 Fish hull, combines flybridge elements with those typical of planing pilothouses, and in less than ten meters manages to provide interior and exterior space worthy of a larger vessel. The philosophy behind the test version is to maximize overnight capacity while still ensuring good habitability when the berths are folded out. All this without exaggerating the width at full beam, and consequently without compromising performance and, above all, seaworthiness. The hull features a deep V-shaped bow and a rather narrow stern angle, thus enhancing wave penetration in rough seas with precise directionality. In short, an all-round boat that is well suited to fishing trips as well as family cruises.

Left: The interior table and the benches that can be raised from the gunwales create a dinette in the cockpit. Bottom left: The flybridge console. Right: The broken bow pulpit and the winch inside the chain locker make it easier to get off the boat onto the dock.

 

Proteo 30 Fly Construction: ◊◊◊

The hull and deck are constructed of polyester fiberglass with gelcoat even in areas not visible to the eye, and reinforcements are added at points most subject to stress. The interior fittings are molded and finished with wooden doors and trim. There are two watertight bulkheads, one in the bow and the other in the stern.

Blanket: ◊◊◊ ◊

By making the most of every inch of space and adopting ingenious solutions, such as the fold-down cockpit benches, the shipyard has managed to ensure a comfortable aft deck and generous sunbathing areas forward, despite the generously sized deckhouse that culminates in the flybridge. Access to the swim platform is also very convenient.

On the left, the interior helm station. On the right, the spacious cabinet in the bow cabin, with a small cabinet and a chest of drawers.

 

Interior: ◊◊◊

In less than ten meters, the Proteo 30 Fly can accommodate as many as seven berths in three separate compartments, though their dimensions aren’t exactly “home-like.” The galley, located on the left, features a kitchen unit complete with a sink, two gas burners, electric hotplates, a refrigerator, and a small cabinet; along the starboard side is a dinette that can be converted—albeit with some effort—into a double berth. Moving down to the sleeping area, on the left is a second dinette that converts into a double berth, with a single bunk bed above it created from the backrest, and on the right is the bathroom with a separate shower, sink, and toilet. In the bow is the cabin with a double berth, complete with closets and dressers.

Top left: the galley. Below: the double berth in the bow. On the right: the second dinette amidships, which can be converted into a double bed and a single bunk bed.

Systems: ◊◊◊◊

The electrical system, complete with a battery charger and rectifier, features wiring with a cross-sectional area greater than that required by RINa; power is supplied by four batteries—two for starting the engines and two for onboard services—all of which are easily accessible for inspection. The automatic fire suppression system and the anti-theft alarm are standard equipment.

Proteo 30 Fly Engine: ◊◊◊

The test unit was equipped with two VM inline six-cylinder intercooled turbocharged inboard diesel engines, with a displacement of 4,164 cc and indirect fuel injection, each producing 220 cv at 3,600 rpm. The transmission is in-line with counter-rotating four-bladed propellers having a diameter of 19′ and a pitch of 26′.

The boat’s specifications and the performance measurements taken during our test.

 

Performance: ◊◊◊ ◊

Thanks to the 18° stern angle, the Proteo 30 Fly maintains excellent course holding even at low rpm, almost as if it had stern drives rather than a shaft drive. At economy cruising speed, we easily exceeded 25 knots, a sign of an adequate power-to-weight ratio.

In 1999, the Proteo 30 Fly was priced starting at 206,000,000 lire.

by Roberta Limardo


Are you a classic boat enthusiast or simply curious about the masterpieces of the past? Then the Classic Boat Archive is the place for you: the only column where the entire history of motorboating is made accessible to the public, boat by boat, article by article. Discover what’s already online and keep checking the archive: it’s updated four times a week! For your convenience, you can access it by clicking HERE!

Share:

Facebook
Twitter
WhatsApp

Leave a Comment

Your email address will not be published. Required fields are marked *

Sign up for our Newsletter

Join the Sailing Newspaper Club

Powerboats, its stories, from small open to motoryachts. Sign up now for our free newsletter and receive the best news selected by the editorial staff each week. Enter your email below, agree to the Privacy Policy and click the “sign me up” button.

Once you click on the button below check your mailbox

Privacy*


Highlights

You may also be interested in.

Pursuit 2270 CC (6.58) — the outboard (and trailerable) boat designed for fishing

Welcome to the special Classic Boat Archive section, where Boats by Motor opens for you its paper archive where hundreds and hundreds of boats we have tested, presented and reviewed in the magazine’s more than 35-year history are kept. Technical data, original boat data sheets, including engines and performance. In short, a database (constantly being

smartgyro sg65

The Smartgyro SG65 is the new compact stabilizer for boats ranging from 16 to 20 meters

As we all know, the battle against rolling while at anchor or underway is as old as the sea itself. Today, however, a major breakthrough comes from the La Spezia-based company Smartgyro, which is preparing to officially unveil at Metstrade in Amsterdam (November 17–19) the brand-new Smartgyro SG65, a state-of-the-art gyroscopic stabilizer designed for boats

Scroll to Top