Fini35For the coming season we will see the debut of Fini 35, the new 11.40-meter outboard dinghy, but with a homologation length of 9.95 meters thanks to which it is a watercraft.
Designed by Giovanni Ceccarelli, this rib is made with Tecnavan Interiors, a company specializing in aeronautics, which brought its expertise in technical terms, but also in materials and FEM analysis on critical components.
Fini 35
It is an 11-meter cabin cruiser and can be chosen either as an inboard version, which enhances the open-air habitability of the cockpit and stern, or as an outboard version.
It has an overall width of almost 4 meters (3.95 m) and this, in line with current trends, enhances deck space and livability.
Characteristics of the Fini 35 are, for example, a stern that, in the inboard version, is particularly versatile and technological.
Toward the bow a cockpit with a C-shaped sofa presumably capable of becoming a large sundeck.
The “pure” sun deck proper, however, is toward the bow, beyond the helm station.
How it is built
The construction is in carbon composite pre-impregnated with epoxy resin, the laminates are made in clean room and then cured in autoclave at medium temperature, ensuring a compact structure free of any voids that can lead to delamination and osmosis phenomena.
At the structural level, this dinghy can count on an extensive study phase with fluid dynamic analysis tests, carried out by the company Fluid Engineering, analyzing the behavior of the boat under speed conditions from 16 to 40 knots.
The construction technology adopted has made it possible to achieve a saving in the weight of the composite artifact compared to a traditional construction of about a 20 percent as well as giving greater hull rigidity an important element at high speeds.
These two elements, in addition to an original hull with variable V resulting from CFD median design and validation by the Ceccarelli studio, are elements in favor of sailing comfort and fuel economy.
35 The Fini 35 can be equipped with a large T-Top in the center capable of covering the entire central area.
The shipyard has worked to make it as aerodynamic as possible to reduce the impact of the deckhouse and windshield.
The company that distributes this dinghy is called Fini Marine entrusted to the management of Guido Fini.
For the future, he revealed that he already has several models that will follow this 35.
Fini 35 Data Sheet
- Overall length: 10.90-11.40 m
- Length of approval: 9.95 m
- Overall width: 3.95 m
- Weight with standard motors 3.6 t
- Fuel tank capacity 700L
- Water tank capacity 120 lt
- Black water tank capacity 44 lt
- Certification category CE-B
- People capacity 14
- Sleeps 2
- Inboard/outboard engine 2 x 300/350 hp
- Outboard motor 2 x 300/350 hp
- Configuration with and/or without T top
- Master stateroom below deck
- Photovoltaic System (only with T Top Installed)
- Design : Ceccarelli Yacht Design John Ceccarelli
- Shipyard Builder : Tecnavan Interiors S.R.L
For information – G.Fini@finimarine.it
