Those very fast boats, but “without propellers.” That’s how they get around

THE PERFECT GIFT!

Give or treat yourself to a subscription to Boats in Motion print + digital and for only 39 euros a year you get the magazine at home plus read it on your PC, smartphone and tablet. With a sea of advantages.

Destriero
The Steed, propelled by three KaMeWa waterjets.

If we talk about watercraft, we immediately think of jet skis or dinghies, small and snappy, great for juggling the subcoast. Yet, if we look at the largest and fastest yachts-from the legendary Destriero, capable of crossing the Atlantic at nearly 60 knots, to the gigayacht Azzam (180 meters)-we find that they are not propelled by traditional propellers, but by waterjets themselves.

Hydrojet. The “propellerless” engines

To understand the advantage, one must first understand the operation. Meanwhile, in the case of a hydrojet, we tend to speak of an impeller(impeller) in place of a simple ducted propeller(propeller). A hydrojet propulsion basically works as a pump, propelling the boat through the action-reaction principle. The heart of the system is precisely an impeller that rotates inside a protected duct in the hull. Water is drawn in from a sea inlet under the hull, compressed and “shot” out from the stern through a nozzle that accelerates its flow, generating thrust by reaction.

hydrojet
Diagram of a hydrojet

There is no frictional rudder: it is the entire rear nozzle that moves, directing the jet and, therefore, the thrust. Similarly, for reverse, you do not reverse the rotation of the engine, but lower a bulkhead-known as a spoon because of its shape-that deflects the jet forward, passing under the hull.

All of this perfectly explains why the hydrojet dominates the market for workboats and tenders. By having no exposed parts under the hull(no axles, rudders, sharp blades), it provides minimal draft and total safety for swimmers. In addition, the ability to vector thrust allows great maneuverability even at low speeds. But a megayacht does not have to land on the beach or slalom between buoys. So what is the real reason for its adoption on large hulls?

Hydrojet. Winning friction

Drag does not increase linearly, but increases with the square of speed. Going from 10 to 20 knots requires some effort; going from 30 to 40, although we are still talking about 10 knots more, requires exponentially more power.

We explained, in a simple way, the different hydrodynamic conditions of a hull in this video:

When a hull exceeds the critical 25-30 knot threshold, the submerged appendages (axles, support stands, rudders) become formidable brakes. Dragging all that “hardware” through the water at high speed generates unsustainable parasitic drag. The hydrojet eliminates the root of the problem: the hull stays clean. The water slides off unimpeded. That’s why on fast craft, the hydrojet becomes more efficient than the conventional propeller, despite the pump’s internal pressure drop.

How to make a 70-meter boat go 50 knots

Then there is the size factor: it is one thing to make 40 knots with a 7-meter, quite different to make them with a 70-meter.

If the hull is large but slow, the conventional propeller wins in efficiency and cost; if the hull is (relatively) small and fast, the surface propeller is great. But if you want a very large hull to also be very fast (relative to its size), the hydrojet is the best solution.

Pushing a behemoth at those speeds with conventional propellers would require immense diameters rotating at low speed, causing unacceptable noise and vibration for on-board comfort. In contrast, the hydrojet splits power over smaller impellers rotating at high speed in a pressurized environment for smooth, progressive thrust with less vibration. In a word: more comfort.

The hydrojet would thus seem to be a real paradox: the perfect choice for the small tender but also the only possible solution for giants who want to run fast. We discussed this in this video in which we analyze the pros and cons of all popular propulsion systems:

Share:

Facebook
Twitter
WhatsApp

Leave a Comment

Your email address will not be published. Required fields are marked *

Sign up for our Newsletter

Join the Sailing Newspaper Club

Powerboats, its stories, from small open to motoryachts. Sign up now for our free newsletter and receive the best news selected by the editorial staff each week. Enter your email below, agree to the Privacy Policy and click the “sign me up” button.

Once you click on the button below check your mailbox

Privacy*


Highlights

You may also be interested in.

Pursuit 2270 CC (6.58) — the outboard (and trailerable) boat designed for fishing

Welcome to the special Classic Boat Archive section, where Boats by Motor opens for you its paper archive where hundreds and hundreds of boats we have tested, presented and reviewed in the magazine’s more than 35-year history are kept. Technical data, original boat data sheets, including engines and performance. In short, a database (constantly being

smartgyro sg65

The Smartgyro SG65 is the new compact stabilizer for boats ranging from 16 to 20 meters

As we all know, the battle against rolling while at anchor or underway is as old as the sea itself. Today, however, a major breakthrough comes from the La Spezia-based company Smartgyro, which is preparing to officially unveil at Metstrade in Amsterdam (November 17–19) the brand-new Smartgyro SG65, a state-of-the-art gyroscopic stabilizer designed for boats

Scroll to Top